View EM6D-100-4D_1114409.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

05264
EM6D-100-4D
EMI FILTER/TVS ARRAY
APPLICATIONS
Cellular Phones Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards
IEC COMPATIBILITY (EN61000-4)
61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns
DFN-16
FEATURES
ESD Protection > 25 kilovolts EMI Filtering/TVS Low Pass Filters > 25db Attenuation from 800MHz to 3GHz Protects up to Six(6) Data Lines RoHS Compliant
MECHANICAL CHARACTERISTICS
DFN-16 Package Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C Consult Factory For Leaded Device Availability Flammability Rating UL 94V-0 Device Marking: Marking Code 12mm Tape and Reel Per EIA Standard 481
PIN CONFIGURATION
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
GND
16 15 14 13 12 11 10
BOTTOM VIEW
1
2
3
4
5
6
7
8
9
05264.R1 2/07
1
www.protekdevices.com
EM6D-100-4D
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25C Unless Otherwise Specified
PARAMETER
Operating Temperature Storage Temperature DC Power Per Resistor Resistance @ 20% Soldering Temperature for 10 seconds
SYMBOL
TA TSTG P R TL
VALUE
-40 to 85 -55 to 150 400 100 265
UNITS
C C mW OHMS C
ELECTRICAL CHARACTERISTICS PER LINE
PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT @3V ID A 0.1
@ 25C Unless Otherwise Specified MINIMUM ATTENUATION CUT-OFF FREQUENCY (50 OHMS I/O) ZERO BIAS TYPICAL CAPACITANCE PER DIODE (See Note 1) @2.5V, 1MHz C pF 10
TYPICAL FORWARD VOLTAGE
VWM VOLTS EM6D-100-4D M6D-4D 5.0
@ 1mA V(BR) VOLTS 6.0
@10mA VF VOLTS 1.2
@ 800-3000 MHz dB 25
fC MHz 150
Note 1: 18pF @ 0V, 1MHz, 20% tolerance.
FIGURE 1 INSERTION LOSS
0 -5 -10
Gain (dB)
-15 -20 -25 -30 -35 0.1 1 10 100
2.5 Volts
0 Volts
1000
10000
Frequency (MHz)
05264.R1 2/07
2
www.protekdevices.com
EM6D-100-4D
GRAPHS
1.100
FIGURE 1 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25C)
Normalized Resistance
1.060
1.020
0.980
0.940
0.900 -40 -20 0 20 40 Temperature C 60 80 100
1.6
Cj - Capacitance (Normalized)
FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25C)
1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6
VR - Reverse Voltage - Volts
FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE (through the filter)
35
5 Volts per Division
25
15
5
-5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform)
05264.R1 2/07
3
www.protekdevices.com
EM6D-100-4D
DFN-16 PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
D
PACKAGE DIMENSIONS
MILLIMETERS DIM A A1 A3 b D E E2 E3 E4 e K L MIN 0.74 0.00 0.178 0.21 3.91 1.50 0.40 2.92 2.90 0.46 0.33 0.23 MAX 0.84 0.05 0.228 0.28 4.11 1.70 0.50 3.18 3.10 0.56 0.40 0.30 INCHES MIN 0.029 0.00 0.007 0.008 0.154 0.059 0.016 0.115 0.114 0.018 0.130 0.009 MAX 0.033 0.002 0.009 0.011 0.162 0.067 0.020 0.125 0.122 0.022 0.160 0.012
E Pin 1 Reference TOP VIEW A3 A SIDE VIEW A3
A1
MOUNTING PAD LAYOUT
4.10mm 0.161 0.50mm BSC 0.020 BSC
L 1
e 8 E3 E2 E4 16 9 BOTTOM VIEW b
0.28mm 0.011 0.50mm 0.020
NOTES: 1. Controlling dimensions in millimeters 2. Dimensino b applies to terminal and is measured between 0.25 and 0.30mm from terminal. 3. Coplanarity applies to the exposed pad as well as the terminals. TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T71 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., EM6D-100-4D-T71. 2. Suffix-T73 = 7 Inch Reel - 3,000 pieces per 12mm tape, i.e., EM6D-100-4D-T73. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., EM6D-100L-4D-LF-T73. Outline & Dimensions: Rev 2 - 10/06, 06056
1.91mm 0.079
K
0.51mm 0.020
Tape & Reel Specifications (Dimensions in millimeters)
Reel Dia. 178mm (7")/330mm(13") Tape Width 12mm A0 1.9 0.10 B0 K0 D E F W P0 P2 P tmax 0.25
4.30 0.10 1.00 0.10 1.50 0.10 1.75 0.10 3.50 0.05 12.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10
P0 10 Pitches Cumulative Tolerance on Tape. 0.2
t
D
P2
E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot
F
W
P
User Direction of Feed
COPYRIGHT (c) ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products.
ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com
05264.R1 2/07
4
www.protekdevices.com

▲Up To Search▲

Price & Availability of EM6D-100-4D

	To Download EM6D-100-4D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .